CVD डबल कोटेड CCMT09T308-HM कार्बाइड टर्निङ इन्सर्टहरू हल्का स्टीलका लागि

To prevent insert waste and easily detect wear, the gold-colored TiN outer layer of the Dragonskin multilayer CVD Ti(C,N)/Al2O3/TiN coating from cutting tool. It not only enables users to clearly identify insert wear and index before a breakage, but also prevents sharp cutting edges from going unused and the insert being inadvertently discarded.

ISO-P स्टिलहरू भाग मेसिनिङमा सबैभन्दा ठूलो सामग्री समूह हुन्, र यसमा नरम, कम-कार्बन स्टील्सदेखि उच्च-मिश्रित स्टील ग्रेडहरू सम्मका सामग्रीहरू समावेश छन्। यसमा थपिएको कठोरता, अनुप्रयोग प्रकारहरू र टर्निङ अपरेशनको समयमा मेसिनिङ अवस्थाहरूमा भिन्नताहरू छन्। उपयुक्त अनुक्रमणिका सम्मिलित ग्रेड छनौट गर्न सजिलो बनाउन।

The cutting characteristics of most turning applications are similar. For a given surface only one cutting tool is used. This tool must overhang its holder to some extent to enable the holder to clear the rotating workpiece. Once the cut starts, the tool and the workpiece are usually in contact until the surface is completely generated. During this time the cutting speed and cut dimensions will be constant when a cylindrical surface is being turned. In the case of facing operations the cutting speed is proportional to the work diameter, the speed decreasing as the center of the piece is approached. Sometimes a spindle speed changing mechanism is provided to increase the rotating speed of the workpiece as the tool moves to the center of the part.